SECURITY SYSTEM - Alarm System » alarm concept


  • Keypads make it easier to take advantage of your security system features and options, with graphics and Menu-driven prompts that guiding you every step of the way.

Motion Sensor

  • A motion detector is a device that detects moving objects, particularly people.

Magnetic Contact

  • Magnetic Contacts work with door and window. When opening up the window or door, it breaks the circuit; a signal is sent to the alarm control panel that an entry has been breached.

Photo beams

  • Photo beams provide an invisible 'fence', it consist of an 'upper' and 'lower' beam between each other.
  • Both photo beams must be broken prior to alarm signal being sent so photo beam sensors eliminate false alarms caused by falling leaves, branches, animals and movement of vegetation due to weather.

Outdoor Siren

  • Outdoor alarm sirens install in the exterior part of the building, it warns the intruders and alerting neighbors, as well as anyone inside the home of the danger situation.

Remote Control

  • Remote controls able to remotely activate or deactivate alarm system anyway in the building area.

Roof Sensor

  • The device will go into alarm when both infrared sensor & microwave sensors detect intrusion at the same time. It operates by detecting a rapid change in temperature when an intruder crosses the area. It is ideal to install in the roof section.

GSM Module

  • Do not have any physical landline in your premises? GSM Module can link to your alarm panel to conduct 24 hours alarm monitoring.
  • This 24-hours Telephony Monitoring system reports on your home alarm ’s status through instant automatically activated as your normal telephone for out-going calls.

Indoor Siren

  • Indoors siren install inside the premises, it can scare off the intruders and alert the entire neighborhood.

Outdoor Sensor

  • Outdoor sensor detect intruders as soon as they enter a protected area and before they can gain access to people or valuable assets.
  • A dual technology, essentially two detectors, is more tolerant and resistant to animal caused false alarms. Unit usually ignores a good-sized animal or multiple small animals without generating an alarm condition.

Break Glass Sensor

  • A glass break detector is a sensor used in electronic burglar alarms that detects if a panel of glass is shattered or broken

Strobe Light

  • The strobe, specifically, can help locate the site of the danger, whether by a concerned neighbor or emergency services, especially on a dark night.

Panic Button

  • A device to assist in alerting somebody in emergency situations where a threat to persons or property exists. It send signal to alarm panel and trigger the siren’s sound.
  • Panic button works for elderly as well; the device can be carried around by a vulnerable person and activated when a treat is detected.

Vibration Sensor

  • These devices are mounted on barriers and are used primarily to detect an attack on the structure itself.
  • When movement or vibration occurs, the circuit moves and breaks the current flow, which produces an alarm. The most applied for vibration sensor was installed in the window grid

Smoke Detector

  • A smoke detector is a device that detects smoke, typically as an indicator of fire.
concept store   l   location   l   term & conditions   l   MRF
©2013 EI SYSTEM SOLUTION SDN BHD. All rights reserved. Developed by Lagenz